Hybrid Torque Control System Singapore
World's first torque control using both air and electric power
Hybrid Torque Control System
Hybrid torque control system is an ideal design for a brushless electric screwdrivers. Most of all, the patent HD-Series hybrid system is the world’s first torque control tool. Hence, it is using on both air and electric power to set as well as to control the torque.
In addition, both the patent algorithm and the precise pneumatic pressure sensor can allow to have a precision digital torque selection.
Hence, this can provide the repeatability of the torque applied as well as a real-time monitoring process.
Contact us if you are interested in the products.
Take a look at other ranges of torque screwdriver, if this is not what you want.
Brushless Electric Screwdrivers
- Various models have range from 4.4 lbf.in – 86.8 lbf.in
- Electric Screwdrivers can feature a high performance
- ESD housing as well as to have a bit tip control to 1 ohm (the cable is not ESD)
- Low inertial force that provides a smooth reaction-less operation with little G force to assemble the parts
- Low noise, low vibration as well as a low maintenance
Controller
- Programmable digital torque setting with memory for as well 8 preset torque settings
- Selectable speed up to 1,800 rpm
- Programming as well as monitoring with PC software
- Programmable multi-sequence operation
There are other features include Built-in Screw Counter, Screw Counting Selections, Motor Run Time Limits, Output Signal Types and LED Display Selections.
Preset Parameter Settings
- Three selectable units of measure: lbf.in, N.m, Kgf.cm.
- Selectable settings for Torque, Speed, Min & Max Angle and a Soft Start time.
- Maximum angle control and verification
- Minimum angle control as well as error reporting