Rotary Torque Sensor
Ideal torque monitoring tool
RTSX Rotary Torque Sensor
RTSX rotary torque sensor is an ideal torque auditing tool. Most of all, this torque sensor can help to test the actual torque being applied on the assembly applications. RTSX rotary torque sensor can monitor the torque being applied from the tool to fastener or bolt.
Contact us if you are interested in the products.
Take a look at other ranges of torque sensor, if this is not what you want.
- Rotary torque sensor has bi-directional.
- Use with most power tools, high RPM tools or rotational measurement applications.
- Connect between the power tool and the joint.
- Features ARCII technology, an instant auto-recognition system of the BLRTSX. BLRTSX can connect to the FTA-100 Tester, PTT Meter or LTT Tester.
- Accuracy ± 0.25% of full scale*.
RTSX Sensor – Specifications
- Output at Rated Capacity:
> 6 Nm [53 lbf.in] rated torque 2 mV/V - Interchanegeability: Matched for mv/v and shunt calibration +0.3% FS
- Nonlinearity: +0.2% FS
- Excitation Recommended: 10V DC or AC RMS
- Bridge Resistance: 350 ohms
- Usable Temperature Range: 41-122 degrees F
- Mating Connector: Bendix PTO6A-10-65(SR)
- Safe Overload: 125% of rated output
Note: * This is the stand alone accuracy for the torque sensor. When the torque sensor is couple with Mountz torque analyzer, there is a system accuracy. Review the system accuracy listed with each torque analyzer, FTA-100 Tester, PTT Meter or LTT Tester. In addition, see the below list of torque ranges.
Don't Miss Out! Call To Engage Us?
To enquire more about our Torque Wrench Solution products and services, simply call (+65) 65551745 or fill up our contact form by clicking the button below.
Call Us For Solution:
+65 65551745